Home About us Products Our Knowledge Based   Our Installed Based support Contact Us  
Acoustics
Flair Lighting Controller
Flair Lambent FTL controller
Spectra Lite
LED Strip lights
LED Controller




























































Spectra Lite LED strip and controller
Effectron Luminex has developed, designed and manufactured it in India for Indian conditions. Complete system to cater to the needs of Interior Designer. Full Colour, Dual colour and Mono colour units are available to suit customer needs and budget.

LED STRIPS are perfect for indirect lighting, for Coves and for Wall washer, for all background lighting. Mechanical designs are such that user can easily adjust the light to the area it intent to highlight. Units are made in user familiar fluorescent light sizes of 1200mm and 600mm.
Making electrical connections is very simple and user friendly. Polarised screw type plug-in connectors are used to daisy chain all the LED Strip lights. Low voltage control supply of 20A rating can drive large number of LED Strips. Control supply can also be daisy chained so that only one Colour mixing Controller is required to light up large area.
LED Strips are available in Full colour RGB, Dual colour and monochrome (white, warm white, blue, green, red, amber, etc.).

Photo Block
Full Colour RGB version, Model is dimmable and is designed to colour mix to the desired colour hue. Colour change controller is available in two options
• Stand alone Colour Mixing Controller is user friendly. It displays the extent of colour mix of RGB LED’s being set on LCD display. Colour setting can be saved in Four Moods for recall later. IR handheld remote will change the Mood in addition to front Panel buttons.
• DMX 512 controllable Colour Mixing Controllers are also available for larger system. Provision has been made to set the starting address of the unit to match with the larger system.

Dual Colour Version Model is designed to colour mix two coloured LED’s like Red and Green; Blue and White; Blue and Green; Red and Blue; etc., this combination gives limited colour combination like Red and Green gives hues of Amber in addition to Red and Green effects. These LED Strips are economical to Full Colour and uses the same Controller to control the colour mix.

Monochrome Version Model is designed for single colour. These LED Strips are economical to Full Colour or Dual colour. Dimming is possible using Colour Mixing Controller. It is available in various colours like Warm White, Cool White, Red, Green, Blue, and Amber.


Control Power Supply: Model

Compact SMPS supply of 12V, 20A rating with built-in cooling fan and operating in wide voltage range of 160-265Volts, 45-65 Hz, AC having Connectors for connecting LED Strip for daisy chain and Colour Mixing Controller.

For large area, number of Control Supplies can be daisy chained through LED strips without running additional wires from Colour mixing controllers. Internal electronics built-in the Control Supply eliminate need for this extra wiring.

Sheet metal enclosure, well ventilated, is designed for continuous duty operation of 24X7. Three number Polarised plug-in connectors for connection to

• LED Strip
• Colour Mixing Controller
• Return from last LED Strip

duly labeled are provided on the front panel. One Power supply is capable of driving upto 65 mtr length of single colour LED Strip. For larger requirement more Power Supply units can be connected in Daisy Chain.

Only one Colour Mixing Controller shall be needed per area, routing of controller signals is via electronics built-in the Power Supply unit.

Photo Block

Colour Mixing Controller: Model

Colour mixing controller is capable of providing control signals for RED, Green, Blue and White LED’s in the LED Strip. Microcontroller controlled colour mixing controller has been built with colour combination storage capability in Four Moods so that when recalled, it will light the LED strips in pre-defined colour.

Handheld IR remote selects the Mood, beside front panel Mood select buttons. LCD display indicates the Mood it is running, beside displaying the user defined name of the Property (Hotel). In programming Mood LCD display will indicate the percentage of RGB content, so that same setting may be repeated, if required, on other controllers.

Controller is wall mountable of compact design, built around standard 8 module modular switch plate. Connection terminals are screw type accessible after opening the unit, for permanent installation. Only one cable is required to be connected between Controller and first Power Supply unit, as shown in diagram below.

 
 
Copyright © 2008 Effectron Luminex Limited.